TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 1 of 8 www.qorvo.com ? 6 pin 3 ? x ? 3 mm leadless smt package general description the TQQ0302 is an exceptionally high performance baw filter for the lte band?3 uplink. this filter is housed in a compact 3? x ? 3 mm package for base station applications. low insertion loss, coupled with high attenuation makes this filter an ideal choice for uplink rf filtering needs. the TQQ0302 is part of qorvos extensive portfolio of rf baw and saw filters. product features ? usable bandwidth 75 mhz at 1747.5 mhz ? internally match for 50 ohm operation ? low insertion loss ? small size: 3.00 x 3.00 x 1.07 mm ? surface mount device ? rohs compliant, pb-free ? high power handling of 1w ordering information part no. description TQQ0302 2,5 00 pieces on a 7 reel (standard) TQQ0302-pcb evaluation board applications ? base station infrastructure ? repeaters ? general purpose wireless functional block diagram top view pin configuration pin no. label 1, 3, 4, 6 ground 2 ant 5 b3 ul 1 2 3 6 5 4 ant b3 ul gnd gnd gnd gnd downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 2 of 8 www.qorvo.com ? absolute maximum ratings parameter rating storage temperature ? 40 to + 85 ?c operation temperature ?40 to + 85 ?c rf input power ( 1 ) (pin 2, 5) +30 dbm notes: 1. input power: cw, at +55?c for 10,000 hours. recommended operating conditions parameter min typ max units t case 0 - + 70 c electrical specifications are measured at specified test conditions. electrical specifications C b3 ul operating temperature range: +0 to +70c. parameter conditions min typ max units center frequency [fo] - 1747.5 - mhz insertion loss 1710 mhz C 1785 mhz - 2.4 3.3 db amplitude variation (1) 1710 mhz C 1785 mhz - 1.6 - db absolute attenuation 500 mhz C 1200 mhz 25 28 - db 1600 mhz C 16 80 mhz 25 36 - db 1 795 mhz C 1805 mhz 4.5 (2) 6.2 - db 18 05 mhz C 26 00 mhz 30 36 - db input return loss 1710 mhz C 1785 mhz 9 10.4 - db output return loss 1710 mhz C 1785 mhz 9 11.4 - db load/source impedance - 50 - notes: 1. describe the total variation over the defined frequency range 2. at +25c only. downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 3 of 8 www.qorvo.com ? TQQ0302-pcb evaluation board bill of material C TQQ0302-pcb reference des. value description manuf. part number n/a n/a printed circuit board qorvo 1124609 u1 n/a band 3 uplink baw filter qorvo TQQ0302 c1, c2 100 pf cap., chip, 0402, 5%, 50v, npo/cog various various j1, j2 n/a sma edge connector johnson comp. 142 -0701-851 evaluation board pcb information top, middle & bottom layers: 1 oz copper substrates: fr4 dielectric, 0.0139 , 0.0 28 , 0.0139 thick fl1 c1 c2 j1 j2 1,3,4,6 2 5 50 50 ? ? c1 100pf c2 100pf single-ended input single-ended output downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 4 of 8 www.qorvo.com ? performance plots C band 3 ul test conditions unless otherwise noted: temp= +25c -50 -40 -30 -20 -10 0 500 1000 1500 2000 2500 3000 3500 4000 4500 |s21| (db) frequency (mhz) ant to b3 ul - frequency response temp.=+25c -6 -5 -4 -3 -2 -1 0 1670 1690 1710 1730 1750 1770 1790 1810 |s21| (db) frequency (mhz) ant to b3 ul - passband response temp.=+25c -40 -35 -30 -25 -20 -15 -10 -5 0 1670 1690 1710 1730 1750 1770 1790 1810 |s11| (db) frequency (mhz) ant port return loss temp.=+25c -30 -25 -20 -15 -10 -5 0 1670 1690 1710 1730 1750 1770 1790 1810 |s22| (db) frequency (mhz) b3 ul port return loss temp.=+25c downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 5 of 8 www.qorvo.com ? package marking and dimensions notes: 1. all dimensions are in millimeters. angles are in degrees. 2. dimension and tolerance formats conform to asme y14.4m- 1994. 3. the terminal #1 identifier and terminal numbering conform to jesd 9 5-1 spp- 012. pcb mounting pattern top view recommended land pattern metallization. top view recommended land pattern stencil aperture. notes: 1. all dimensions are in millimeters. angles are in degrees. 2. use 1 oz. copper minimum for top and bottom layer metal. 2x 0.10 c 2x 0.10 c 3.000 3.000 terminal 1 indentifier 0.10 c 1.020 1.100 0.100 0.100 0.700 1.075 (1x) 1.400x x 0.600y 0.10 c a b terminal 1 (5x) 0.650x x 0.600y 0.10 c a b top view bottom view side view a b a 1.100 2.150 3.000 3.35 ref 1.10 0.84 1.21 pin1 (1x) 1.68 x 0.60 0.18 2.80 ref (5x) 0.93 x 0.60 0.05 typ 0.05 typ package marking product identifier: q0302 date code: yyww assembly code: axxxx q 030 2 yyww xxxx downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 6 of 8 www.qorvo.com ? tape and reel information C carrier and cover tape dimensions tape and reel specifications for this part are also available on the qorvo website. standard t/r size = 2500 pieces on a 7 reel. feature measure symbol size (in) size (mm) cavity length a0 0. 132 3.35 width b0 0. 132 3.35 depth k0 0. 051 1.30 pitch p1 0.157 4.00 centerline distance cavity to perforation - length direction p2 0.079 2.00 cavity to perforation - width direction f 0.138 3.50 cover tape width c 0.213 5.40 carrier tape width w 0.315 8.00 downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 7 of 8 www.qorvo.com ? tape and reel information C reel dimensions tape and reel specifications for this part are also available on the qorvo website. standard t/r size = 2500 pieces on a 7 reel. feature measure symbol size (in) size (mm) flange diameter a 6.969 177.0 thickness w2 0.559 14.2 space between flange w1 0.346 8.8 hub outer diameter n 2.283 58.0 arbor hole diameter c 0.512 13.0 key slit width b 0.079 2.0 key slit diameter d 0.787 20.0 downloaded from: http:///
TQQ0302 lte band 3 uplink baw filter data sheet, february 23, 2017 | subject to change without notic e 8 of 8 www.qorvo.com ? rohs compliance this part is compliant with 2011/65/eu rohs directive (restrictions on the use of cert ain hazardous substances in electrical and electronic equipment) as amended by directive 2015/863/eu. this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free handling precautions parameter rating standard caution! esd -sensitive device esd?C?human body model (hbm) class 1c ansi / esd /?jedec js - 00 1 esd?C? machine model (m m) class b ansi / esd / je sd22-c101 msl?C?moisture sensitivity level level 3 ipc/jedec j-std- 020 solderability compatible with lead-free (260c max. reflow temp.) soldering process. solder profiles available upon request. contact plating: ni au contact information for the latest specifications, additional product information, wo rldwide sales and distribution locations: web: www.qorvo.com tel: 1- 844 -890-8163 email: customer.support@qorvo.com for technical questions and application information: email: appsupport@qorvo.com important notice the information contained herein is believed to be reli able; however, qorvo makes no warranties regarding the informa tion contained herein and assumes no responsibility or liability whatsoe ver for the use of the information contained herein. all infor mation contained herein is subject to change without notice. customers shoul d obtain and verify the latest relevant information before pl acing orders for qorvo products. the information contained herein or any u se of such information does not grant, explicitly or imp licitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. this information does not constitute a warranty with respect to the products described herein, and qorvo hereby disclaims any and all warranties with respect to such products whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, including the implied warranties of merchantability and fitness for a particular purpose. without limiting the generality of the foregoing, qorvo pro ducts are not warranted or authorized for use as critical compo nents in medical, life-saving, or life-sustaining applications, or other appl ications where a failure would reasonably be expected to cause severe personal injury or death. copyright 2017 ? qorvo, inc. | qorvo is a registered trademark of qorvo, in c. pb downloaded from: http:///
|
